The current hand-built Reference turntable employs a low-speed, AC motor driving the platter via a neoprene belt, thereby providing complete vibration insulation. The main bearing is manufactured from high-grade aluminium with two pressed fit P.T.F.E bushes at either end of the housing ensuring minimum contact with the bearing spindle, which it self comprises of a silver steel shaft and aluminium hub running on to a stainless steel ball bearing. The turntable is future-proof and comes with a ten year guarantee.

Specifications

Platter 305mm diameter machined from a solid billet of aluminium, fitted with six aluminium inertia platter weights. The record is supported on neoprene pads, thereby reducing rumble and induced static to an absolute minimum
Plinth 20mm acrylic
Isolation Feet Fixed aluminium fitted with sorbothane hemispheres
Lid Clear acrylic hinged mounted with swing leg support
Main bearing Slim sectioned ball-ended ground and polished silver steel spindle running onto a ceramic ball bearing and hardened steel thrust plate
Motor Synchronous
Tonearm Boards Available for current and classic arms
Power requirement 115vac or 240vac, single-phase, 50 Hz or 60Hz
Speeds 33.3 and 45 r.p.m.

Optional Upgrades

Brass inertia platter weights
Black, clear or white acrylic plinth
Sweep arm
Stylus brush

Dimensions

Width 440 mm
Depth (lid closed) 420 mm
Depth (lid open) 520 mm
Height (lid closed) 160 mm
Height (lid open) 500 mm