| Stylus Brush |
The Stylus Brush incorporates a brush of Squirrel hair, for the gentle removal of dust from even the most delicate stylus assemblies and avoiding the damage caused to such assemblies by the use of those brushes containing hard nylon bristles.
The unit is intended for permanent installation by means of a 5mm clearence hole on the plinth, in such a postion as to ensure that the stylus is brushed from front to back by manually moving the brush beam with a radial motion,
The brush height adjustment is such as to ensure its suitability for most installations and the plastic sheathing may be cut to length with a razor blade or scissors as dictated by the height requirement of the installation.
| Stylus Scales |
The Stylus Scales weighs accurately the downward stylus force of any tonearm assembly, designed to track at 5 grammes or less. Pure balanced beam construction, incorporating a spirit level indicator, and precisely made uni-pivot, these scales are designed to weigh from 0-5 grammes in 1/20th gramme increments. The balance is sensitive to 1/100th of a gramme, and is capable of achieving an overall weighing accuracy of better than 1/50th of a gramme.
| Sweep Arm |
The Sweep Arm consists of a fine squirrel hair brush mounted on a balanced beam so that the brush tracks the record at a downward force of less than 1 gramme. Thus, the use of the Sweep Arm ensures that the record is cleaned thoughly whilst in use without producing wear on the record or causing any noticeable amount of static